DK1100 Fully-Automatic Pocket Hole Boring Machine:
The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flushly in the bottom of the pocket and the hole to be plugged with wooden dowel. The DK1100 series are built to be extremely quiet for operator comfort and their simple design results in very fast drill bit changes.

The FE Model is a floor-standing electric, fully-automatic pocket hole boring machine. 110VAC is required to power the drill spindle of the machine and 100 psi of air pressure is needed to cycle the hold-down clamp and forward motion cylinder.

The FP Model is a floor-standing, entirely pneumatic powered, fully-automatic pocket hole boring machine. 110-120 psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder.

The TP Model is a tabletop, entirely pneumatic powered, fully-automatic pocket hole boring machine. The only difference from the FP model is that it is contained in a short, benchtop cabinet that allows it to be built into a workbench or transported from your shop to the worksite.

Further Information on the DK1100 Series machines
• Product Brochure